Campus/Building networking OFC
At Smartnet, we understand how much of a hassle running cabling for your entire campus can be. If you have multiple buildings, each with their own arrangements and necessities, finding a company that can lay out and install all of the necessary cabling arrangements can be very difficult. We have the experience in cabling to make sure that your entire campus has the best wiring possible. We understand the necessity of backbone cabling, we have the ability to do both underground and aerial cabling, and since we got our start doing structured cabling, we are experts in the field of cabling organization.
Every Campus Cabling project has its own unique set of challenges, from deciding whether to do above-ground or underground cabling or deciding whether it is worth it to do a wireless bridge between two buildings. We also have the length and breadth of expertise and resources to understand what the best plan is, regardless if you have railroad tracks, a river, an interstate, or other complicated obstruction preventing a simpler campus cabling plan.
The campus backbone cabling is the segment of the network that typically presents the designer and user with the most options, especially in large networks such as those found at universities, large industrial parks, or military bases. The campus backbone also is typically the most constrained by such physical considerations as duct availability, right-of-way, and physical barriers.
Long Distance Transmission Using Telephone Grade Copper Cable
The G.SHDSL.bis ATM EFM Router is 2-wire or 4-wire Ethernet Bridge/Router that complies with G.991.2 standards and has an optional built-in four port 10Base-T /100Base-TX auto-negotiation and auto-MDIX switch. The G.SHDSL.bis ATM EFM Router provides multi-rate 2-wire / 5.7Mbps and 2.3Mbps or 4-wire 11.4Mbps and 4.6Mbps payload rates over existing single or two pair copper wire. The G.SHDSL.bis ATM EFM Router is designed not only to optimize the service bit rate from central office to customer premises but also integrates high-end Bridging/ Routing EFM bonding capabilities with advanced functions such as virtual server mapping and VPN pass through. The G.SHDSL.bis ATM EFM Router allows customers to leverage the latest in broadband technologies to meet their growing data communication needs. In bridge mode, the four switching ports may be configured for IEEE802.1Q VLAN or port based VLAN applications. The modem can be configured in either central or client mode providing a point-to-point solution.
Coaxial Cable transmission
point-to-point EoCNA (Ethernet over Coax Network Alliance) solution that efficiently extends 10/100/1000Mbps Ethernet circuits up to 700 meters (2,296feet) at full Fast Ethernet speed using existing coaxial cable. The EOC-10A will allow Ethernet connectivity in existing facilities or homes without pulling extra cable. This is perfect solution for Ethernet on the factory floor where systems have been upgraded from slower serial communication to Ethernet networking. Installation is easy with absolutely no settings required. The EOC-10A is used in Coaxial cable systems to extend Ethernet connectivity over existing CCD/CATV grade Coaxial cable. The EOC-10A works by sharing the same cable with CATV signals, without interference to the existing CATV signals.